DF64 · GrinderDF64V (Red Titanium Burr Edition)
A 64mm flat-burr single-dose grinder with a variable-speed brushless motor and titanium-coated burrs, sold under DF64, Turin, MiiCoffee and other white-label names. It is the budget-friendly answer to the Lagom P64's RPM-adjustable workflow.
The short version
This is a genuinely capable 64mm single-dose grinder that lets you tune RPM instead of just grind size, at a fraction of what variable-speed competitors cost.
Accept the single-dose ritual (bellows, RDT, no hopper convenience) and the fact that you are buying a rebadged Chinese factory grinder, not a boutique brand, and it delivers real value.
Why people buy it
- 64mm flat burrs with Red Titanium (TiCN) coating that the maker rates for roughly 3000kg of throughput before wearing
- RPM dial (roughly 600-1800rpm depending on the exact revision) lets you actually taste the difference speed makes, unlike fixed-speed rivals
Why they don’t
- No hopper for lazy dosing - it is single-dose only, so you weigh and load beans every time
The full tally
- 64mm flat burrs with Red Titanium (TiCN) coating that the maker rates for roughly 3000kg of throughput before wearing
- RPM dial (roughly 600-1800rpm depending on the exact revision) lets you actually taste the difference speed makes, unlike fixed-speed rivals
- Magnetic, tool-free chute and declumper make cleaning and burr access far easier than the original DF64
- Aftermarket 64mm burr scene (SSP, Mazzer-compatible) means you can upgrade well past the stock burrs later
- No hopper for lazy dosing - it is single-dose only, so you weigh and load beans every time
- Stutters or clogs at low RPM with fine espresso grinds unless you hot-start the burrs and dose slowly
- Static and some retention persist without RDT fluid and the bellows ritual, and the stock dosing cup does not seat cleanly on a 58mm portafilter
What the community knows
Years of owner threads, distilled — strongly recommended.
The value single-dose darling — low retention, espresso-capable, an enormous online following and burr-swap scene.
Value
price-to-performance the community respects
Ceiling per dollar
how far the cup can go, per dollar
Reliability
shows up every morning, year after year
All 8 community measures
price-to-performance the community respects
shows up every morning, year after year
parts and repairs — you are never stranded
mods, guides, and community know-how around it
kind to first-timers
years before you outgrow or replace it
how far the cup can go, per dollar
speed and simplicity, day to day
Worth knowing before you buy — Most owners wish they'd budgeted for the P64 for long-term serviceability, or committed fully to modding the DF64 platform rather than sitting between.
Known weak points — motor wear over extended use; occasional alignment drift on burr carriers
Living with it
The part spec sheets skip: counter space, upkeep, and what owners learn later.
The honest note — Owners typically stay put and swap in SSP or Mazzer-compatible 64mm burrs rather than replacing the whole grinder, since the platform and motor already outperform the stock burrs. The next real step up is a single-dose grinder with a bigger flat burr (DF83V) or a boutique unit like the Niche Duo or Lagom P64 for those chasing workflow polish over price.
The full spec sheet
- Class
- Single dose
- Burrs
- 64mm flat
- Drive
- Electric
- Adjustment
- Stepless
- Clarity lean
- Clarity & sparkle
- Espresso suitability
- 4.5/5
- Brew versatility
- 3.5/5
- Single dosing
- Yes
- Hopper
- 0 g
- Burr-swap scene
- Documented
- Maintenance
- 3/5
- Noise
- 2.5/5
- Build longevity
- 3.5/5
- Dimensions
- 13 × 22.5 × 30 cm
On film
How it runs on camera, from around the community.
Common questions
Is the DF64V the same as the DF64 with Red Titanium burrs?
The DF64V is the variable-speed sibling of the standard DF64. Both use 64mm flat burrs and are commonly sold with Red Titanium (TiCN) coated burrs as the stock option, but the DF64V adds an RPM dial and a different motor, while the plain DF64 runs at a fixed speed.
Do I need bellows and RDT with the DF64V?
Most owners still use the bellows and a light RDT spritz to keep retention and static manageable, even though the magnetic chute and ionizer on later revisions cut down on both compared to the original DF64.
Can I upgrade the burrs later?
Yes. It uses the common 64mm format, so SSP and other aftermarket flat burr sets are documented to fit, which is a big part of the platform's appeal.
Weighing it against something we didn’t list? Compare it with anything on file →
Still weighing it? The finder narrows all 429 down to three that fit your life.
Run the two-minute finder →