Turin DF64 Gen 2 vs DF83V Variable Speed Grinder
Same class, different tax brackets.
About CA$543 apart — the split below is what the gap buys.
Turin
Strong consensusUS$359–420 · CA$465–500
The DF64 Gen 2 is a competently built, single-dose flat-burr grinder that delivers flat-burr clarity and dial-in consistency well above its price bracket. The trade-off is a purely manual, b…
Full record & live prices →
DF64 / Turin (Frigga)
Strong consensusCA$950–1,100 · US$699–799
This is what happens when a budget grinder brand chases commercial-scale burrs on a home-appliance budget: huge 83mm burrs and a genuinely clever auger-feed system for the price, but the dia…
Full record & live prices →The split
Where they actually differ
Measured side by side, they tie on all 6 counts we track — the choice is price, size, and taste in hardware.
DF64 Gen 2
DF83V Variable Speed Grinder
The price
DF64 Gen 2 costs less, decisively
CA$465–500· CA$950–1,100
weakerstronger
The DF83V Variable Speed Grinder leans clarity and sparkle; the DF64 Gen 2 leans clarity and sparkle. Pick the cup, not the machine.
The counter’s vote
Looks barely figure in either machine’s record — the counter can sit this one out.
DF64 Gen 2: Appliance-neutral industrial aesthetic; no award citations or kitchen-approval talk in the record — purchased for function and value, not visual appeal.
DF83V Variable Speed Grinder: Stripped industrial aesthetic appeals to the function-first crowd; no award citations or kitchen-approval talk, but the matte finish and compact footprint register as honest rather than polarizing.
Only the DF83V Variable Speed Grinder: a documented burr-swap scene.
Where they tie: espresso duty · brew range · reliability record · built to last · value per dollar — don’t let a spec sheet invent a difference.
On the counter
The size difference, to scale
So — which one?
Take the DF64 Gen 2 if —
- The difference stays in your pocket — or goes into beans
Take the DF83V Variable Speed Grinder if —
- You want a chassis that grows
The measured differences here are small; the price gap is not. Take the DF64 Gen 2 and put the difference into fresh, roast-dated beans — they move the cup more than this split will.
Known weak points
DF64 Gen 2
Flat burr wear over time (inherent to flat burrs, not specific failure); occasional motor/noise complaints in early units (gen 1 more prevalent); no widespread catastrophic failures documented, but sub-$500 flat burr longevity is inherently lower than conical or significantly more expensive…
DF83V Variable Speed Grinder
Variable speed motor/controller reliability questions; burr wear reports under sustained single-dosing; alignment drift over extended use.
For the row-by-row readers
The whole sheet, side by side
Matching rows fade back — the ink is where they differ.
DF64 Gen 2
DF83V Variable Speed Grinder
Class
Single dose
Single dose
Burrs
flat
83mm flat
Drive
Electric
Electric
Clarity lean
Clarity & sparkle
Clarity & sparkle
Espresso suitability
4/5
4/5
Brew versatility
3.5/5
4/5
Retention
~0.2 g
—
Single dosing
Yes
Yes
Hopper
50 g
60 g
Workflow demand
4/5
—
Maintenance
2/5
2.5/5
Noise
3/5
2.5/5
Build longevity
3.5/5
3/5
Dimensions
13 × 22.5 × 30 cm
13.5 × 32 × 39.5 cm
Adjustment
—
Stepless
Burr-swap scene
—
Documented
One owner each
“So far I'm liking my new DF64 Gen 2. It's my first grinder. I'm very excited about it!”
On film, together
How they run side by side, from around the community
Wrong match-up? Change one side → — any two on file compare.
Still torn?
This page weighs them against each other. The finder weighs them against your mornings.
Two minutes of questions — milk, noise, budget, space — scored across everything on file. It’s honest when the answer is neither of these.
Take the two-minute finder →