Baratza Sette 30 vs Turin DF64 Gen 2
Same class, different tax brackets.
About CA$93 apart — the split below is what the gap buys.
Baratza
CA$370–410 · US$280–300
The Sette 30 delivers genuinely fast, low-retention espresso grinding at an honest price, inheriting the same Etzinger burrs as its pricier siblings. The trade you make is 30 coarse-stepping…
Full record & live prices →
Turin
Strong consensusUS$359–420 · CA$465–500
The DF64 Gen 2 is a competently built, single-dose flat-burr grinder that delivers flat-burr clarity and dial-in consistency well above its price bracket. The trade-off is a purely manual, b…
Full record & live prices →The split
Where they actually differ
Sette 30
DF64 Gen 2
Quiet operation
DF64 Gen 2 leads, decisively
Brew range
DF64 Gen 2 leads, clearly
Built to last
DF64 Gen 2 leads, clearly
Espresso duty
DF64 Gen 2 leads, clearly
Reliability record
DF64 Gen 2 leads, clearly
Value per dollar
DF64 Gen 2 leads, clearly
weakerstronger
The DF64 Gen 2 leans clarity and sparkle; the Sette 30 leans syrup and body. Pick the cup, not the machine.
The counter’s vote
Looks barely figure in either machine’s record — the counter can sit this one out.
Sette 30: Functionally neutral industrial aesthetic; no design awards or "kitchen approval" talk in real threads; bought entirely for performance, not appearance.
DF64 Gen 2: Appliance-neutral industrial aesthetic; no award citations or kitchen-approval talk in the record — purchased for function and value, not visual appeal.
Where they tie: retention — don’t let a spec sheet invent a difference.
On the counter
The size difference, to scale
So — which one?
Take the Sette 30 if —
- Syrupy, traditional cups are the goal
- The difference stays in your pocket — or goes into beans
Take the DF64 Gen 2 if —
- Bright, separated cups are the goal
- There are sleepers to protect
- You brew more ways than one
- You are buying once
The DF64 Gen 2 at ~24% more buys real things: quiet operation and brew range. If those aren't your mornings, the Sette 30 does the job and keeps the difference in your pocket.
Known weak points
Sette 30
Burr wear and inconsistency creep after 18–24 months of daily use; motor whine increases with age; upper burr holder can develop play; firmware updates sometimes required post-purchase.
DF64 Gen 2
Flat burr wear over time (inherent to flat burrs, not specific failure); occasional motor/noise complaints in early units (gen 1 more prevalent); no widespread catastrophic failures documented, but sub-$500 flat burr longevity is inherently lower than conical or significantly more expensive…
For the row-by-row readers
The whole sheet, side by side
Matching rows fade back — the ink is where they differ.
Sette 30
DF64 Gen 2
Class
Entry espresso-capable
Single dose
Burrs
40mm conical
flat
Drive
Electric
Electric
Adjustment
Stepped (micro)
—
Clarity lean
Syrup & body
Clarity & sparkle
Espresso suitability
3/5
4/5
Brew versatility
2/5
3.5/5
Retention
~0.2 g
~0.2 g
Single dosing
Yes
Yes
Hopper
300 g
50 g
Workflow demand
2/5
4/5
Maintenance
1/5
2/5
Noise
5/5
3/5
Build longevity
2/5
3.5/5
Dimensions
13 × 24 × 40 cm
13 × 22.5 × 30 cm
One owner each
“So far I'm liking my new DF64 Gen 2. It's my first grinder. I'm very excited about it!”
Wrong match-up? Change one side → — any two on file compare.
Still torn?
This page weighs them against each other. The finder weighs them against your mornings.
Two minutes of questions — milk, noise, budget, space — scored across everything on file. It’s honest when the answer is neither of these.
Take the two-minute finder →